Aqua-Meter Clamp

The water sensor clamp measures the flow and temperature in a water pipe using a "Time of Flight" measurement method and transmits the data wirelessly. Through an internal analysis of the flow, water leaks, and other anomalies are detected, and the owner is alerted.

The device is clamped onto the outside of the water pipe without the need to interrupt the water supply. Its flexible design and innovative software allow it to be used on water pipes ranging from DN15 to DN40 (diameter 15…50 mm) with many available materials in the market, such as PEX, PEX AL, copper, or PE. It meets all the requirements of the European Metering Directive (MID). With a footprint of only 60 mm above the water pipe and a length of 110 mm, the device is very slim and short, making it easy to install.

The device can be powered either by an external USB-C power supply or by 2 * AA alkaline batteries. Whenever an external power source is available, it is used independently of the inserted batteries.

Communication Options

The sensor is available for three different communication configurations:

LoRaWAN  

The device is controlled through LoRaWAN commands, operating as a LoRaWAN Class A device. The use of the device requires LoRaWAN network coverage, such as 'The Things Network.' Otherwise, a dedicated LoRaWAN gateway must be installed and operated.

WiFi

The device communicates via WLAN, either to the Aqua-Scope Cloud and consequently to a free app on mobile phones or PCs, or it can communicate via MQTT to a server of your choice. Additionally, it supports communication via a 'Webhook,' sending data as a JSON object to a Smart Home Gateway.

Manuals and Data Sheets

Ordering Information

Did you know that in Germany alone, 1.1 million water damages are reported to insurance companies every year? That's 10 times more than home burglaries.

Insurers pay approximately 60% of all revenues from home insurance solely for water damages. That's nearly 3 billion euros just in Germany.